FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Bluehalo, an AV Companyis seeking a Research Engineer in the area of Machine Learning for Robotics and Natural Language Processing, to serve at Wright-Patterson Air Force Base in Dayton, OH. The position will be in collaboration with the Digital Manufacturing Research Team of the Materials and Manufacturing Directorate. Fields like artificial intelligence, computer vision, and collaborative robotics are advancing rapidly with impact in numerous application spaces. Long term success in environments such as aerospace manufacturing and maintenance will require greater accuracy, reliability, and attention to detail than other areas. Our team of researchers aims to meet this challenge through innovative techniques including leveraging multiple modalities of input data, careful fine-tuning for particular use cases of interest, and emphasizing specialized approaches such as semantic segmentation sitting within higher level, generalist architectures. The ideal candidate will propose, develop, and characterize novel approaches to advance the ways humans can interact with collaborative robots and AI generally in manufacturing and maintenance environments. Key Responsibilities: Collect and curate datasets for advancing human-machine co-learning by developing custom techniques for multimodal data acquisition, post-processing, automatic tagging, and cloud storage.Leverage in house data (audio, visual, motion capture) to fine tune large scale models for improved performance on manufacturing, assembly, and maintenance tasks.Provide regular communication and feedback to the team regarding progress, setbacks, and new research opportunities.Contribute to a collaborative team environment by engaging in creative discussions with members working in related areas, with opportunities to engage in research areas such as robotics, advanced manufacturing, and AI-guided design optimization.Participate in the academic community by writing papers, giving seminars, and leading workshops.Ensure compliance of human subject’s research with approved Institutional Review Board (IRB) approved protocols. Requirement Qualifications: This position is onsite at a government facility and requires U.S. citizenshipMaster’s degree in computer science, engineering, or related field.Self-motivation, ability to work cooperatively in diverse teams, and flexibility for evolving program objectives.Experience with multi-modal AI models.Experience with common programming languages/packages such as Python, Matlab, TensorFlow/Pytorch, OpenCV, etc. Preferred Qualifications: Experience with high performance, cloud, and/or GPU computingExperience with robotics hardware and/or simulation such as ROS, Gazebo, etc.EducationPreferredMasters or betterLicenses & CertificationsPreferredNo ClearanceEqual Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Fort Loramie Employment Status: Salary Full-Time Function: Engineering Req ID:26163 SummaryLincoln Electric is seeking an Electrical Project Engineer to join our team at the Fort Loramie Automation site. This position plays a critical role in managing and executing the engineering processes that drive the design, development, production, and service of Lincoln Electric’s state-of-the-art automation equipment. At Lincoln Electric, we offer career growth potential along with a competitive compensation package, including bonus incentives, student loan repayment, tuition reimbursement, paid time off, paid holidays, a comprehensive benefits package (medical, dental, and vision), retirement plans, and much more.What You Will Do: As an Electrical Project Engineer, you will support the design and development of Lincoln Automation equipment for automotive, aerospace, appliance and energy industries. Your key responsibilities will include:Project Leadership & Coordination: Assist in defining project timelines, resource requirements, and staffing needs. Lead cross-functional teams, ensuring timely delivery of project milestones and adherence to financial targets (labor and material costs).Engineering Design & System Integration: Work closely with mechanical, electrical, pneumatic, and hydraulic engineers to drive the design of complex automation systems. Lead the creation and troubleshooting of control systems including PLC, Safety PLC, HMI, servo motion, and robot programming.Troubleshooting & Debugging: Guide teams in the development and resolution of issues. Oversee start-up, debugging, and final system maturation to ensure systems meet customer specifications and performance standards.Budget & Cost Management: Lead the effort in maintaining project budgets, ensuring efficient use of resources and alignment with financial expectations. Work with procurement teams to identify cost-effective suppliers and establish purchasing strategies.Onsite Support & Commissioning: Manage onsite installation activities, assist with equipment commissioning, and ensure successful system integration. Resolve any customer payment issues as required upon project completion.Documentation & Standardization: Coordinate compiling operator and maintenance manuals. Assist in developing and maintaining engineering and product standards to ensure consistency and high-quality deliverables. Ensure compliance with ISO documentation standards for projects.Team Development & Mentorship: Provide guidance and mentorship to junior engineers, ensuring their technical development. Assist in team performance evaluations, fostering a collaborative, high-performance culture.Education and Experience RequiredEducation: A technical degree in Electrical Engineering or a related field is highly desired.Experience: A minimum of 10+ years of hands-on experience in industrial automation design and engineering. Proven expertise in working with PLC/HMI systems, robot programming, control systems, network & fieldbus systems, and safety systems.Experience with electrical schematic creation and design using AutoCAD Electrical (preferred).Demonstrated leadership and project management experience, including working with machine builders, management teams, and cross-functional support functions.Ability to travel ~25%Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!LocationAnna, OhioJob PurposeThe Electrical Controls Design role provides high quality, reasonably priced, on-time hardware, software, and safety design solutions to ensure stable new model and new technology introduction in all HDMA North American manufacturing facilities.Key AccountabilitiesWork in an engineering team atmosphere understand design requirements to create/modify automated production equipment.Provide electrical design to produce engineering hardware data to assemble/build, and wire a control system for production equipmentProvide electrical design to produce engineering software data to accomplish the control task for production equipment processes. (i.e. PLC, HMI, Motion Control, and Robotic programming).Provide on-site support to install, system up, and mature the control system for production equipment.Create and maintain a critical path schedule, determine resources, and manage resources to produce the control system design deliverables to achieve the overall project milestones for medium to large projects/ medium to high complexity.Provide direct mentorship to Associate Engineers in role on a 1:1 or 1:2 ratio where technical knowledge transfer occurs to foster growth in other individual contributorsProvide Project Leadership for equipment controls design for North America new model for an entire plant or new machine. Provide Plan versus actual reporting on QCDMS requirements and propose countermeasures to gaps encountered.Lead and attend design reviews to ensure design standards are achieved and design meets specification requirements for control system design deliverables for self and project team members. (peer reviews and mentee reviews)Qualifications, Experience, and Skills4-year Bachelor of Science degree in Electrical Engineering or 2-year Electrical related degree with 4 years’ experience.2-8 years in Electrical/Controls Engineering on automated production equipment. (depends on educational background)Knowledge of machine safety regulations. Knowledge of NEC/NFPA 79 standards. Servo position control experience. Robotic integration experience. Field I/O networking experience. Project management capabilities. Basic background in automated equipment electrical hardware/software design. Knowledge of PLC and HMI hardware and software functions.Workstyle75% Office environment - Design. 25% Manufacturing floor - Debug/Install.Must be willing to conduct physical confirmations in the manufacturing environment and conduct testing/debug on the manufacturing floor and/or at vendor sitesTravel up to 20% (North American Manufacturing Plants)Average work week is 45~48 hours (some weekends and 1 week shutdowns twice per year)What differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeResponsible for leading casting die designs for North American mass production facilities with outputs in the form of 3D models and detailed drawings while working closely with customers and internal team members to ensure high quality parts and production stability.Key AccountabilitiesDesign new model casting tooling utilizing CAD software.Design business plan casting tooling utilizing CAD software.Implement customer specifications and request into new and existing casting dies.Investigate improvements or countermeasure tooling related problems during die builds and mass production.Create and coordinate design schedules then track the progress of design release.Lead and manage the design of multiple tooling projects.Investigate and implement business related improvement items.Investigate potential new model casting shapes and provide feedback to product designers.Qualifications, Experience, & SkillBachelor’s or Associate’s degree in Mechanical Engineering, Mechanical Engineering Technology, or similar.At least 3 months co-op experience.Familiarity with CAD software.Mechanical/manufacturing knowledge.Decisions ExpectedDetermine optimum tooling design considering SMEQCD (safety, morale, environmental, quality, cost and delivery) characteristics, manufacturing, and mass production stability.Conduct root cause analysis on issues found during development and/or trial activity and propose countermeasure and path forward.Working Conditions70% office environment: sitting for extended periods and working on PC equipment.20% manufacturing environment: PPE required at all times in manufacturing environment, standing for prolonged periods (up to 2hrs), occasionally lifting up to 40lbs, occasionally working inside casting machines, potential exposure to heat, occasional exposure to dust, oil or grease.Up to 10% travel required, including international (Japan, Canada, Mexico).What differentiates Honda and make us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Paid OvertimeRegional Bonus (when applicable)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer Mobility Education Reimbursement for Continued LearningTraining and Development programsAdditional Offerings:Tuition Assistance & Student Loan RepaymentLifestyle AccountChildcare Reimbursement AccountElder Care SupportWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsFree Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations – with an unrivaled record of on time and on (or under) budget deliveries.SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we’re applying this tenacity and expertise to the U.S. Air Force’s (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you’re passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here.Do you enjoy being the resident expert mentoring others in your area of expertise Join our team and take your career to new heights! As an Engineering Technician V, you will be regarded as a Subject Matter Expert (SME) and use your skills and expertise to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You'll be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. You'll ensure our systems and components meet established specifications.Qualifications You Must Have:Associate's degree in a related field of study, at least 10 years of relevant experienceA higher-level degree may substitute for experienceRelated experience may be considered in lieu of required educationAbility to understand and interpret complex technical schematics, diagrams, blueprints, manuals and/or publicationsInstrumentation experience: Comprehensive understanding of the use of standard laboratory test equipment, spectrum analyzers, network analyzers, Oscilloscope, Pitot static equipment, other measurement equipment, hand tools, and power toolsTroubleshooting skillsThe ability to obtain and maintain a Secret U.S. Security Clearance is requiredQualifications We Prefer:Basic skills with avionics installation tooling, wiring, wiring repair, and wiring installationUnderstanding of soldering techniquesPrevious experience in a manufacturing environmentExperience with 3-D CAD softwarePrior experience in a Lead role; the ability to mentor, train, guide and inspect the work of subordinatesBackground in the Aerospace and Defense Industry, NASA, the US Department of Defense or US MilitaryExposure to simulations through functional and logical models and system analysisExperience with digital or analog circuit analysisSNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE: This position requires the ability to obtain and maintain a Secret U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment. Non-U.S. citizens may not be eligible to obtain a security clearance. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. Adjudicative factors which affect the outcome of the eligibility determination include, but are not limited to, allegiance to the U.S., foreign influence, foreign preference, criminal conduct, security violations and illegal drug use.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!SNC is an Equal Opportunity Employer committed to an environment free of discrimination.Employment decisions are made based on merit without regard to race, color, age, religion, sex, national origin, disability, status as a protected veteran or other characteristics protected by law.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

What Makes a Honda, is Who makes a HondaHondahas a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Please Note:Sponsorship for employment visa status for these positions is unavailable. Applicants requiring sponsorship for employment visa status now or in the future (e.g., F-1 CPT/OPT, H-1B, TN, etc.) will not be considered.About this Position:Serve as a T-Stage Zone Lead within the East Liberty Plant (ELP) Weld (WE) department, responsible for Weld process maturation, supporting all New Model and Mass Production activity in the department to execute projects and sustain current and future business goals.Responsibilities include:Plan/execute activity for build events, cycle up, maturation, & report status to T-Stage LeadCommunicate with T-Stage Lead, ADC Zone members, and MMC groups to ensure work is on schedule and specifications are clearly communicatedWeekly meetings for zone activity related to Drawings, build events, pending itemsReview information from ADC and identify any gaps related to documents or teachingLead 2-3 zone support associates and support Weld department with any Current or New Model requestsWeld and sealer confirmations during build events, report back to T-Stage lead and Dept.Analyze/understand parts master list and applications for responsible zone – model typesFollow build schedule, sort and ship parts to ELP for build events, distribute parts linesideOversee current and new model training plans for Weld department, zone-specific trainingWork with Safety and Process group to complete Ergonomic Risk Assessments for zone processesRead Parts drawings, Spec Notices, 3D CATIA data, communicate with Process/Quality.Who we are seeking:Required Work Experience:0-6 years’ experience based on education, 2 years Engineering experience and/or project management preferredRequired Education:Bachelor’s Degree in engineering (Mechanical, Industrial, Manufacturing)6 Years Equivalent experience or current Engineering Staff at HDMADesired skills:Microsoft Office – Excel and PowerPoint 2D and 3D drafting utilities – CAD and CATIA; analytical problem solving and decision making; project management. Read drawings and know parts for zonesAdditional Position Factors:Generally, first shift production hours, split/second/weekend shift support required. Overtime weekly40% Fast-paced manufacturing environment, 60% office environment. +/- 10% depending on necessary workHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job Purpose: Lead/Support investigation of moderately complex quality problems/change points for internal and external customers to identify cause, countermeasure, and product disposition.Key Accountabilities:Using engineering analysis and data collection to assure material conformance to spec and causes of product failureManage/participate in investigations for quality problems to determine responsibility, root cause and countermeasure through failure analysis of engine components and assembliesSummarization and presentation of analysis results to all levels of organization and other Honda divisionsAbility to communicate with customers and outside departments, and other regionsCoordinate and lead plant wide projects to identify Quality concerns and establish a team and set plan to investigate Quality concernsSupport/Advise/Mentor/Lead other associates on problem analysis projectsEstablish and carry out analysis plans on powertrain problems, by utilizing engineering theory/experience and interfacing with functional experts and other department representatives for coordination of schedules and activitiesEvaluate functional impact of manufacturing process and/or specification variationsQualifications, Experience, and Skills:Bachelors in Engineering or equivalent relevant experience2-8 years based on educationExperience in Quality, Manufacturing or Material AnalysisWorking Conditions:Moderate lifting of componentsWork environment - combination of office, test lab & manufacturing Analysis tools including hand-tools & test equipment5 hours OT/week, with need to work unexpected overtime as issues arise. Limited supplier and international travelWhat differentiates Honda and make us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Paid OvertimeRegional Bonus (when applicable)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer Mobility Education Reimbursement for Continued LearningTraining and Development programsAdditional Offerings:Tuition Assistance & Student Loan RepaymentLifestyle AccountChildcare Reimbursement AccountElder Care SupportWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsFree Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations – with an unrivaled record of on time and on (or under) budget deliveries.SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we’re applying this tenacity and expertise to the U.S. Air Force’s (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you’re passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here.Are you ready to lead the development of next-generation airborne mission systems Join our SIL team where we are building a high-fidelity, full-replica integration lab to mirror and test one of the most advanced aircraft systems in the world. As a Lead Systems Engineer, you will work alongside a multidisciplinary team of engineers through the full systems engineering lifecycleincluding requirements development, architecture definition, system modeling, integration, and verification. You will play a key role in engaging with stakeholders, shaping system-level design and behavior through model-based engineering, and driving integration and test activities across a complex system-of-systems environment. Your leadership and technical vision will ensure the lab evolves in lockstep with the aircraft, enabling mission readiness and supporting rapid issue resolution throughout the program.Qualifications You Must Have:Bachelor's of Sciencedegree in System Engineering or relateddiscipline and typically 14 or more years of relevant experienceHigher education may substitute for relevant experienceDemonstrated knowledge of engineering principles and practices Progressive experience working in multi-disciplinary designand development teamsAdvanced understanding of requirements management, functional requirements parsing, derivation, and allocation; systems design, systems integration, technical risk identification and management strategies, and Verification and Validation (V&V) principlesSecret Level Clearance Is RequiredQualifications We Prefer:Experience with requirements management and system modelling tools, such as DOORS, Rhapsody, NoMagic, MATLABAdvanced Knowledge of industry-standard mechanical design principles, to include, but not limited to requirements management, Model Based System Engineering (MBSE)Experience or certification in INCOSE standardsBackgroundin the Aerospace and Defense IndustryProgressive experience leading baseline definition and maturation in a complex development setting, including the use of high impact trade studies and other measuresAbility to establish and track key Technical Performance Measurements (TPM)SNC offers annual incentive pay based upon performance that is commensurate with the level of the position.SNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE:This position requires the ability to obtain and maintain a Top Secret U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment. Non-U.S. Citizens may not be eligible to obtain a security clearance. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. Adjudicative factors which affect the outcome of the eligibility determination include, but are not limited to, allegiance to the U.S., foreign influence, foreign preference, criminal conduct, security violations and illegal drug use.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!SNC is an Equal Opportunity Employer committed to an environment free of discrimination.Employment decisions are made based on merit without regard to race, color, age, religion, sex, national origin, disability, status as a protected veteran or other characteristics protected by law.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeThe Manufacturing Engineer will lead, create, and implement innovative technical activities and solutions in the areas of Mass Production, Business Plan and New Model to efficiently meet or exceed Safety, Environment, Quality, Delivery, Cost, and Morale characteristic targets. Key AccountabilitiesEffectively communicate upstream and downstream to all levels of the organization to assure common understanding and direction.Review and analyze daily report(s) to identify safety, quality, delivery gaps and develop potential countermeasures and /or root cause analysis opportunities striving for continuous improvement.Utilize data analysis and PDCA to lead, support, develop and justify solutions with related groups/departments for your area of responsibility to solve complex problems.Monitor and manage equipment and processes to ensure optimal manufacturing performance and function while minimizing operating expense. Develop capability of self, colleagues, and team through training, mentoring, and sharing of experiences in area of technical expertise and understanding.Establish priorities and make decisions based on data analytics to most effectively accomplish business objectives.Manage project implementation, schedule, budget and resource allocations to ensure successful completion and target achievement.Test, evaluate, and implement new and innovative technologies to improve overall equipment and process efficiency.Develop and manage investment and expense budgets to achieve overall cost targets.Qualifications, Experience, and SkillsBachelors or Associates degree in Engineering or Engineering Technology with relevant experience (Mechanical, Manufacturing, Industrial or Electrical, etc) with interest in Manufacturing6 years experience required in lieu of a degreeManufacturing co-op/ internship experience preferred Computer literate to support industry standard software applicationsPositive attitude, open minded, and a team playerStrong self-motivation and desire to work in a manufacturing environmentSelf-managed and able to provide and set direction for others to be successfulDemonstrates leadership capabilities Strong communication skillsAbility to multi-task and solve complex problems through analysis to propose and implement appropriate countermeasures based on timing, quality, and cost. Strong technical analysis and troubleshooting skillsAbility to manage projectsWorking ConditionsWork in production environment requiring PPE and lockout in manufacturing operationsManufacturing environment with the potential of working near hydraulic oils, cutting lubricants, ferrous and aluminum materialsHands-on investigation and troubleshooting within equipment to countermeasure issues and to determine improvement activityWorking with hand/power tools, automation equipment, quality gauging and instrumentation50% office environment/ 50% manufacturing lineside activity10-15 hours overtime per week possiblePossible weekend or off-shift support as necessaryTravel 5% (domestic & international)What differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations – with an unrivaled record of on time and on (or under) budget deliveries.SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we’re applying this tenacity and expertise to the U.S. Air Force’s (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you’re passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here.Do you have an eye for detail and enjoy working with amazing products and tools Join us in championing and protecting explorers and heroes! As a Test Engineer at SNC, you will be using your skills and expertise to simulate, test, certify and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll develop complex test plans and procedures for a variety of systems to ensure the verification and validation of all product requirements. You will also be involved with the execution of the tests using top industry tools. As a cross functional engineer, you'll test system and component level new products and develop new test processes throughout the product lifecycle.Must-haves:Bachelor's of Science degree in Engineering or other related discipline and typically14 or more years of experienceThorough understanding and ability to interpretengineering principles and practicesProgressive Experienceworking in multi-disciplinary designand development teamsAdvanced Knowledge of requirements management, system design,and systems integrationDemonstrated experience planning, conducting and documenting Verification and Validation (V&V) activitiesMust obtain and maintain a Second-Class FAA PhysicalThe ability to obtain and maintain a Top Secret U.S. Security Clearance is required Preferred:Experience with various testing equipment, standards, and methodologies to include manual and automated testingAbility to prepare complex and professional test plans, test procedures, and test reports in order to demonstrate compliance to system requirementsFamiliarity with Product and Quality Assurance principles and experienced in generation and disposition of product non-conformancesExperience performing certification testing for various certification organizations (i.e. FAA, NASA, DoD)Ability to read schematics, use service manuals, follow test procedures, and use logical trouble shooting techniquesBackground in the Aerospace and Defense IndustrySNC offers annual incentive pay based upon performance that is commensurate with the level of the position.SNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE:This position requires the ability to obtain and maintain a Top Secret U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment. Non-U.S. Citizens may not be eligible to obtain a security clearance. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. Adjudicative factors which affect the outcome of the eligibility determination include, but are not limited to, allegiance to the U.S., foreign influence, foreign preference, criminal conduct, security violations and illegal drug use.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!SNC is an Equal Opportunity Employer committed to an environment free of discrimination.Employment decisions are made based on merit without regard to race, color, age, religion, sex, national origin, disability, status as a protected veteran or other characteristics protected by law.

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeThe Manufacturing Equipment Senior Engineer will manage and improve production line productivity and quality relative to cutting tool designs to achieve manufacturing characteristic (SEQDCM) improvements.Key AccountabilitiesLead tool budget creation, control, and analysis to evaluate cutting tool budgetsLead/coordinate daily engineering support troubleshooting tooling problems to achieve quality, cost and delivery targets; develop and maintain tools, tool drawings and holdersPerform and coordinate tool analysis - documenting and reporting the results for continuous improvement through the use of sound engineering theory and technology to improve running characteristics (SEQDCM)Coordinate the development of cutting tools, tool holders, and machining process for new model, capacity up, and new technology implementationProvide technical support for internal tool setup and tool regrind processesSupport line side trial runs during tool test and new models to ensure quality and delivery is achievedLead collaborative meetings & negotiate with customers/suppliers of all levels & capabilitiesCommunicate and present technical issues and tool reports to audiences of all backgrounds and levelsWork with production, new model, machining, product development and other engineering to ensure balanced processing occursBuild mutually beneficial relationships with customers and suppliersDevelop, manage and execute Business Plan activities in a timely mannerQualifications, Experience, and SkillsBachelors Degree in Engineering (Mechanical, Electrical) or related equivalent experience2-8 years of experience based on educationKnowledge of: Microsoft Office, AutoCad 2D & 3D, SolidworksSkill In: Presenting, written communication, organizational skillsAbility to: Convey manufacturing concepts to associates, perform advanced mathematics, read engineering designs, manage projectsWorking Conditions40% Office environment & 60% Production Floor implementing projects and/or countermeasures1-2 day trips approximately 3 times per year. Potential overseas travel for 2-4 weeks at a time with New Model5-12 Hours overtime per week / Some weekends and holiday/shutdown work as neededWhat differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHondahas a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeLeads, creates, and implements innovative technical activities and solutions in the areas of Business Plan, New Model, and Mass Production to efficiently meet or exceed Safety, Environment, Quality, Delivery, Cost and Morale characteristics targets.Key AccountabilitiesDevelop, implement, and maintain methods, operation sequence, and processes in the manufacturing or fabrication of parts, components sub-assemblies, and final assemblies.Review and analyze daily report(s) to identify SQD potential countermeasures and /or root cause analysis opportunities and strive for continuous improvement.Utilize data analysis and PDCA to lead, support, develop and justify solutions with related groups/departments for your area of responsibility to solve complex problems.Monitor and manage equipment and processes to ensure optimal manufacturing performance and function while minimizing operating expense. Develop capability of self, colleagues, and team through training, mentoring, and sharing of experiences in area of technical expertise and understanding.Establish priorities and make decisions based on data analytics to most effectively accomplish business objectives.Manage project implementation, schedule, budget and resource allocations to ensure successful completion and target achievement. Estimates manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines/Test, evaluate, and implement new and innovative technologies to improve overall equipment and process efficiency.Develop and manage investment and expense budgets to achieve overall cost targets.Qualifications, Experience, and SkillsBSME / BSMET / BSEE / BS Manufacturing Engineering or equivalent experience2-8 years of experience as an engineering staff in a manufacturing environment or other relevant manufacturing experienceComputer literate to support industry standard software applicationsPositive attitude, open minded & team playerStrong self-motivation and desire to work in a manufacturing environmentSelf-managed and able to provide and set direction for others to be successfulDemonstrates leadership capabilities Demonstrate strong communication (verbal/written) skillsAbility to multi-task and solve complex problems thru analysis to propose and implement appropriate countermeasures based on timing, quality, and cost. Strong technical analysis and troubleshooting skillsAbility to manage projectsDecisions ExpectedFollow-up on daily line performance and countermeasure areas of concernDevelop / Design strategy to achieve unit and company initiativeLeadership and development of other levels / ability to challengeLead and evaluate business planning (Justification for resource changes)Determine budget and schedule activity needed to improve operationsWorking ConditionsWork in production environment requiring PPE and lockout in manufacturing operationsWorking near oils, cutting lubricantsHands-on investigation and troubleshooting within equipment to countermeasure issues and to determine improvement activityWorking with hand/power tools, quality gauging and instrumentation50% office environment/ 50% manufacturing lineside activity10-15 hours overtime per weekPossible weekend or off-shift support as necessaryTravel 5% (domestic & international)Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.